These water diverters can be mounted on a wall, post or stand, to hold larger volumes. They can be adapted to suit a wide range of applications and will manage single or multiple pipes coming from the roof to divert between 20 and 150L.
For mounting to a wall or post: Includes a galvanised steel mounting bracket and saddle. For installing on a stand: A galvanised steel stand is an optional alternative to post or wall mounting.
Add the appropriate length of 300mm pipe based on the quantity of water you wish to divert . For example, a 2m length of 300m diameter PVC pipe is required to hold 150L of diverted water. The kit is easy to freight, and the diverter volume can be made on site to match exact requirements.
Where downpipes combine into one pipe section that leads to the tank, one diverter is usually sufficient. It can be easier to maintain one larger unit rather than a series of smaller diverters installed at each downpipe.
How are they installed?
1. In-feed from the roof; 2. Tee Junction; 3. To the tank; 4. Pipe Bracket; 5. Chamber Inlet; 6. Ball Seat; 7. Sealing Ball; 8. Diverter Chamber; 9. Filter Screen; 10. Wall/Post Bracket; 11. Chamber Outlet; 12. Screw Cap with O’Ring Seal; 13. Flow Control Valve; 14. Hose Connection; 16. Optional Stand
Contact us for information on: Water Diverters, First Flush Water Diverters, First Flush Devices, Roof Washers, Downpipe Accessories, Dirt Traps, Downpipe Filters, Rainwater Diverters, First Foul Flush Diverters.
