A simple and effective first flush water diverter that requires minimal maintenance. Installed at the gutter downpipe or via a T-junction to a new or existing system of 90mm, 100mm or 150mm diameter PVC downpipes. Add the appropriate length of pipe based on the quantity of water you wish to divert. Consider as a guide that each and each 1m of 100mm PVC pipe holds approximately 8L of water.
It is preferable to fit the longest length chamber as possible to ensure better quality water. Install from the roof gutter and after the rain head, to within 150mm above the ground to allow easy access to the end cap.
The diverters are supplied in kit form and come with everything needed to complete installation - just add the length of PVC pipe required to form the diverter chamber.
