Rain Heads prevent leaves and debris from blocking downpipes and entering your rainwater tank.

Rain Heads are ideal for fitting to each downpipe as they protect the building and improve your tank's water quality.

Commercial screened Rain Heads are available in 150mm and 225mm.

• QDC MP4.3 Requirement.
• Single screen - vermin and vector proof (0.955mm stainless steel aperture).
• 150mm - Flow Rate 17 litres/sec.
• 225mm - Flow Rate 17 litres/sec.
• AS3500 Compliant.
• Improves tank water quality.
• No maintenance required - self cleaning Cleanshield^TM technology.
  
• Available in stainless steel, ZINCALUME^® or in any of the 20 standard COLORBOND^® colours.

Commercial First Flush Water Diverter 225mm is sold as a single unit, but can easily be coupled together to provide chamber size required.

Commercial Downpipe First Flush Water Diverter 150mm

The Rain Harvesting Commercial Downpipe First Flush Water Diverter 150mm utilises a dependable ball and seat system.  As the water level rises in the diverter chamber, the ball floats, and once the chamber is full, the ball rests on a seat inside the diverter chamber preventing any further water entering the diverter.  The subsequent flow of water is then automatically directed along the pipe system to the tank.

A slow release valve ensures the chamber empties itself after rain and resets automatically.  The diverted water need not be wasted water because the drain pipe from the diverter chamber can be fitted to a standard hose fitting.

• Improves water quality and protects pumps.
• QDC MP4.3 Requirement (if connected to showers, wash basins, kitchens or hot water services).
• Easy installation with no mechanical parts.
  
• Kit all inclusive - just add pipe and glue.
• Installed at the gutter downpipe or via a T-junction to a new or existing system of 150mm PVC downpipe.
• Low maintenance requirements.

Download 150mm Commercial First Flush Water Diverter Specification Sheet

Download 225mm Commercial First Flush Water Diverter Specification Sheet